Before
After

Cleaning Trial Summary

Segment
Auto Maintenance
:: TSR #16-A-058
Download PDF icon

 

Customer Objective

The customer was looking to improve their cleaning performance, automate their cleaning process and reduce rework and reject rate.

Cleaning Trial Type
Temperature
Aqueous
Temperature
160°F
Industry
Time Required
Industry
Transmission Distribution
Time Required
4-6 hours
Segment
Substrate
Auto Maintenance
Aluminum Stainless Steel Steel
Soil
Baked on Carbon Grease Grime Oil, Shop Dirt
Description of Part(s)
Description of Part
Two aluminum engine parts
Cleaner Used

5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner

• 5% by volume M-100 BCR (Baked on Carbon Remover)

Machine Used
Machine Used

·         Spray Washer (JRI TL3, JRI FL250, JRI FL500, Better Engineering G-2000

·         Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)

Post Cleaning
Post Cleaning

Fresh water rinse followed by air pressure drying

Recommendation to Customer
Recommendation

The ArmaKleen Technical Center recommends using a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 160°F in a Spray Washer for a minimum of 4 hours or a 5% by volume solution of ArmaKleen™ M-100 BCR at 160°F in a Spray-Under Immersion Washer for a minimum of 6 hours.