800.332.5424
Cleaning Trial Summary
The customer was looking to improve their cleaning performance and recover scrap parts
Cleaning Trial Type
Temperature
Epoxy paint
150°F
Industry
Time Required
Gas Transportation
8 hours
Segment
Substrate
Utility
Aluminum
Soil
Epoxy e-coat paint, Grease, Grime, Oil, Shop Dirt
Description of Part(s)
Two cast aluminum housing covers
Cleaner Used
100% by volume ARMAKLEEN™ Paint & Ink Remover
Machine Used
Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)
Post Cleaning
Several areas were brushed with a nylon bristle brush during the fresh water rinse and then air pressure dried.
Recommendation to Customer
The ArmaKleen Technical Center recommends using a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 150°F in a Spray-Under Immersion Washer for a minimum of 8 hours.
