Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance and automate their cleaning process
Cleaning Trial Type
Temperature
Aqueous
Temperature
150°F – 160°F
Industry
Time Required
Industry
Raw Material Manufacturer
Time Required
4 hours
Segment
Substrate
Chemical Manufacturing
Plastic
Rubber
Stainless Steel
Soil
Coal tar Grease, Oil
Description of Part(s)
Description of Part
a stainless steel fan blade with plastic insert and rubber gasket
Cleaner Used
5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner
100% by volume ARMAKLEEN™ Paint & Ink Remover
Machine Used
Machine Used
Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)
Post Cleaning
Post Cleaning
Several areas brushed with a nylon bristle bottle brush during fresh water rinse and air pressure dried
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommends using a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 160°F in a Spray-Under Immersion Washer for a minimum of 4 hours.