Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance.
Cleaning Trial Type
Temperature
Aqueous
Temperature
160°F
Industry
Time Required
Industry
Plant sterol production
Time Required
1 hour
Segment
Substrate
Miscellaneous Manufacturing
Steel
Soil
, Baked on tall oil
Description of Part(s)
Description of Part
Five steel bolts with steel washers
Cleaner Used
10% by volume M-100 BCR (Baked on Carbon Remover)
• 5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner
Machine Used
Machine Used
Spray Washer (JRI TL3, JRI FL250, JRI FL500, Better Engineering G-2000)
Post Cleaning
Post Cleaning
Fresh water rinse and air pressure dried. Several areas of the threaded bolt were lightly brushed with a stainless steel bristle brush during the fresh water rinse.
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommends using a 10% by volume solution of ArmaKleen™ M-100 BCR at 160°F in a Spray Washer or a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 160°F in a Spray Washer for a minimum of 1 hour.