Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance, automate their cleaning process, reduce rework and reject rate, eliminate hazardous chemicals/waste and reduce VOCs.
Cleaning Trial Type
Temperature
Aqueous
Temperature
150°F
Industry
Time Required
Industry
Manufacturing of metering
Time Required
2+ hours
Segment
Substrate
Machine Manufacturing
Brass
Stainless Steel
Steel
Soil
Grease Grime Oil, Shop Dirt
Description of Part(s)
Description of Part
five steel, stainless steel and brass harness type brackets
Cleaner Used
5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner
Machine Used
Machine Used
· Agitating Immersion (SK Model 81.8, Graymills T24)
· Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)
Post Cleaning
Post Cleaning
Fresh rinse followed by air pressure drying
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommends using a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 150°F in an Agitating Immersion Washer for a minimum of 2+ hours or at 150°F in a Spray-Under Immersion Washer for a minimum of 2+ hours.