Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance and automate their cleaning process.
Cleaning Trial Type
Temperature
Aqueous
Temperature
150°F – 160°F
Industry
Time Required
Industry
Machine maintenance
Time Required
1 to 3 hours
Segment
Substrate
Dealership
Iron
Stainless Steel
Soil
Grease Lime slurry, Rust/Oxides
Description of Part(s)
Description of Part
Machine parts
Cleaner Used
5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner
10% by volume ARMAKLEEN™ 4 in 1 NF Cleaner
Machine Used
Machine Used
1. Ultrasonic Washer (Blackstone SK 6315)
2. Spray Washer (JRI TL3, JRI FL250, JRI FL500, Better Engineering G-2000)
3. Spray Under Immersion Washer (Graymills T12, Graymills T24, SK 81.8 w/SUI)
Post Cleaning
Post Cleaning
Fresh water rinse followed by air pressure drying.
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommended using 10% by volume ArmaKleen™ 4 in 1 Cleaner at 160°F in an Ultrasonic Washer for a minimum of 2 to 4 hours.