Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance, automate their cleaning process and reduce rework and reject rate.
Cleaning Trial Type
Temperature
Aqueous
Temperature
160⁰F
Industry
Time Required
Industry
Piping OEM Manufacturing
Time Required
1 minute
Segment
Substrate
Fabricated Metal Product
Stainless Steel
Soil
Cutting Fluids Drawing Lube Grease, Oil
Description of Part(s)
Description of Part
Stainless steel pipe
Cleaner Used
5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner
10% by volume ARMAKLEEN™ M-HP-2
Machine Used
Machine Used
- Agitating Immersion Washer (81.8)
- Spray Washer (TL3, FL250, FL500)
Post Cleaning
Post Cleaning
Fresh water rinse followed by air pressure drying.
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommended the following;
- 5% by volume ArmaKleen™ 4 in 1 Cleaner In either an Agitating Immersion Washer or a Spray Washer at 160⁰F for a minimum of 1 minute.
- 10% by volume ArmaKleen™ MM-Dip in an Agitating Immersion Washer at 160⁰F for a minimum of 1 minute.
- 10% by volume ArmaKleen™ M-HP-2 in a Spray Washer at 160⁰F for a minimum of 1 minute.