Before
After

Cleaning Trial Summary

Dealership :: TSR #17-P-162

 

The customer was looking to improve their cleaning performance and eliminate hazardous chemicals/waste.

Cleaning Trial Type
Temperature
Paint
150°F
Industry
Time Required
Diesel Engine Dealer
1 – 2 hours
Segment
Substrate
Dealership
Aluminum
Soil
Grease, Grime, Oil, Shop Dirt, Unknown Paint
Description of Part(s)
an assortment of aluminum engine blocks
Cleaner Used
Machine Used

Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)

Post Cleaning

Several areas were brushed with a nylon bristle brush during the fresh water rinse and then were air pressure dried.

Recommendation to Customer

The ArmaKleen Technical Center recommends using a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 150°F in a Spray-Under Immersion Washer for a minimum of 2 hours or a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 150°F in a Spray-Under Immersion followed by a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 150°F in a Spray-Under Immersion for a minimum of 1-1.5 hours.