Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance and automate their cleaning process.
Cleaning Trial Type
Temperature
Aqueous
Temperature
150°F - 160°F
Industry
Time Required
Industry
Machines parts Manufacturer
Time Required
1 – 2 hours
Segment
Substrate
Miscellaneous Manufacturing
Plastic
Steel
Soil
Adhesive Epoxy e-coat paint Glue Grease Grime Oil Rust/Oxides, Shop Dirt
Description of Part(s)
Description of Part
An assortment of steel and plastic machine parts.
Cleaner Used
5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner
Machine Used
Machine Used
· Ultrasonic Washer ( SK Blackstone Model 6315)
· Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)
Post Cleaning
Post Cleaning
Fresh water rinse followed by air pressure drying.
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommends using a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 160°F in an Ultrasonic Washer for a minimum of 1 hour or a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 150°F in a Spray-Under Immersion Washer for a minimum of 2 hours.