TSR #16-A-069

Before
After

Cleaning Trial Summary

Airport & Aviation :: TSR #16-A-069

 

The customer was looking to recover scrap parts.

Cleaning Trial Type
Temperature
Aqueous
150°F
Industry
Time Required
Manufacturing of aviation parts
8 hours
Segment
Substrate
Airport & Aviation
Aluminum, Stainless Steel, Steel
Soil
Burnt Oil
Description of Part(s)
A housing plane component and three rods
Cleaner Used
Machine Used

Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)

Post Cleaning

Several areas which were heavily soiled, especially corners and interior were lightly brushed with a nylon bristle brush during the fresh water rinse process as well as several of the exterior areas as soil stuck to the textures surface of the part.  The process was then followed by air pressure drying.

Recommendation to Customer

The ArmaKleen Technical Center recommends using a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 150°F in a Spray-Under Immersion Washer for a minimum of 8+ hours.