Before
After

Cleaning Trial Summary

Fabricated Metal Product :: TSR #16-A-029

Download

 

The customer was looking to improve their cleaning performance, automate their cleaning process and eliminate hazardous chemical/waste.

Cleaning Trial Type
Temperature
Aqueous
160°F
Industry
Time Required
Electrical component Manufacturering
0.25-1 hour
Segment
Substrate
Fabricated Metal Product
Stainless Steel
Soil
Cutting Fluids, Drawing Lube, Oil, Shop Dirt
Description of Part(s)
Six stainless steel transmitter/connectors
Cleaner Used

5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner

Machine Used

·         Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)

·         Ultrasonic Washer (SK Blackstone 6315)

Post Cleaning

Fresh water rinse followed by air pressure drying.

Recommendation to Customer

The ArmaKleen Technical Center recommends using a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 160°F in an Ultrasonic Washer for a minimum of 15 minutes to 1 hour or a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 150°F in a Spray-Under Immersion Washer for a minimum of 15 minutes to 1 hour.