TSR #15-A-240

Before Picture
Before
After Picture
After

Cleaning Trial Summary

 

The customer was looking to improve their cleaning performance, automate their cleaning process, clean mixed metals together and reduce their cleaning costs.

Cleaning Trial Type
Temperature
Aqueous
150°F – 160°F
Industry
Time Required
Generator Repair
15 minutes to 1 hour
Segment
Substrate
Mechanical & Equipment Service
Plastic, Steel
Soil
Grease, Grime, Oil, Rust/Oxides, Shop Dirt
Description of Part(s)
Connector arcs, connector roller, brace, spring
Cleaner Used
Machine Used

1.       Spray Washer (JRI TL3, JRI FL250, JRI FL500, Better Engineering G-2000)

2.       Spray Under Immersion Washer (Graymills T12, Graymills T24, SK 81.8 w/SUI)

3.       Ultrasonic Washer (Blackstone model SK6315)

Post Cleaning

Fresh water rinse followed by air pressure drying.

Recommendation to Customer

The ArmaKleen Technical Center recommended using 5% by volume ArmaKleen™ 4 in 1 Cleaner at 160°F in an Ultrasonic Washer for a minimum of 15 minutes.