The customer was looking to improve their cleaning performance, automate their cleaning process, reduce rework and reject rage, reduce their cleaning costs, eliminate hazardous chemicals and waste, recover scrap parts and reduce VOCs.
• 10% by volume ArmaKleen™ Rust Remover
• 5% by volume ArmaKleen™ 4 in 1 Cleaner
Fresh water rinse followed by air pressure drying. Printed areas were lightly wiped with a clean cotton cloth during the fresh water rinse.
The ArmaKleen Technical Center recommended using 5% by volume ArmaKleen™ 4 in 1 Cleaner at 160°F in an Ultrasonic Washer for a minimum of 1 hour on the square molds and using 10% by volume ArmaKleen™ Rust Remover at 160°F in an Ultrasonic Washer for a minimum of 1 hour for the steel brackets.