Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance, automate their cleaning process and reduce rework and reject rate.
Cleaning Trial Type
Temperature
Paint
Temperature
150°F – 160°F
Industry
Time Required
Industry
Paper Transport Manufacturer
Time Required
1+ hours
Segment
Substrate
Non-metal Manufacturing
Brass
Steel
Soil
, polyurethane elastomer
Description of Part(s)
Description of Part
three steel box/molds (lids and bottoms) with twenty-four steel/brass brackets (eight brackets per box)
Cleaner Used
100% by volume ARMAKLEEN™ Paint & Ink Remover
Machine Used
Machine Used
· Agitated Immersion Spray Washer (SK Model 81.8, Graymills T24)
· Ultrasonic Washer (SK Blackstone 6315)
Post Cleaning
Post Cleaning
Fresh water rinse followed by air pressure drying.
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommends using a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 160°F in an Ultrasonic Washer for a minimum of 1+ hours.