Cleaning Trial Summary
Customer Objective
The customer was looking to automate their cleaning process.
Cleaning Trial Type
Temperature
Powder Coat Paint
Temperature
150°F – 160°F
Industry
Time Required
Industry
Footwear and apparel manufacturer
Time Required
30 minutes
Segment
Substrate
Miscellaneous Manufacturing
Plastic
Stainless Steel
Wood
Soil
Acrylic powder coat paint Gravure ink, Screen ink
Description of Part(s)
Description of Part
): Four soiled wooden stirrers, four new wooden stirrers and two 304 stainless steel blade with plastic handle spatulas
Cleaner Used
100% by volume ARMAKLEEN™ Paint & Ink Remover
Machine Used
Machine Used
· Spray Washer (JRI TL3, JRI FL250, JRI FL500, Better Engineering G-2000
· Ultrasonic Washer (SK Blackstone 6315)
· Agitated Immersion Spray Washer (SK Model 81.8, Graymills T24)
· Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)
Post Cleaning
Post Cleaning
Fresh water rinse followed by air pressure drying.
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommends using a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 150°F-160°F in a Spray Washer or an Agitating Immersion Washer or a Spray-Under Immersion Washer for a minimum of 30 minutes.