Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance, automate their cleaning process and eliminate hazardous chemicals/waste.
Cleaning Trial Type
Temperature
Powder Coat Paint
Temperature
150°F – 160°F
Industry
Time Required
Industry
Automotive service
Time Required
24+ hours
Segment
Substrate
Auto Retail
Steel
Soil
, Epoxy powder coat paint
Description of Part(s)
Description of Part
two steel paint hooks
Cleaner Used
100% by volume ARMAKLEEN™ Paint & Ink Remover
Machine Used
Machine Used
· Ultrasonic Washer (SK Blackstone 6315)
· Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)
Post Cleaning
Post Cleaning
Fresh water rinse followed by air pressure drying
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommends using a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 160°F in an Ultrasonic Washer for a minimum of 24+ hours or in a Spray-Under Immersion Washer at 150°F for a minimum of 24+ hours.