Cleaning Trial Summary
Customer Objective
The customer was looking to improve their cleaning performance, automate their cleaning process, reduce rework and reject rate, eliminate hazardous chemicals and waste and reduce VOCs.
Cleaning Trial Type
Temperature
Ink
Temperature
150°F – 160°F
Industry
Time Required
Industry
Manufacturing
Time Required
1 to 2.5 hours
Segment
Substrate
Primary Metal Manufacturing
Soil
, Ink
Description of Part(s)
Description of Part
Print disks
Cleaner Used
100% by volume ARMAKLEEN™ Paint & Ink Remover
Machine Used
Machine Used
1. Ultrasonic Washer (Blackstone SK 6315)
2. Spray Under Immersion Washer (Graymills T12, Graymills T24, SK 81.8 w/SUI)
Post Cleaning
Post Cleaning
Fresh water rinse followed by air pressure drying.
Recommendation to Customer
Recommendation
The ArmaKleen Technical Center recommended using 100% by volume ArmaKleen™ Paint and Ink Remover at 160°F in an Ultrasonic Washer for a minimum of 1 hour or 100% by volume ArmaKleen™ Paint and Ink Remover at 150°F in a Spray Under Immersion Washer for a minimum of 2.5 hours.