The customer was looking to improve their cleaning performance and reduce rework and reject rate.
100% by volume ARMAKLEEN™ Paint & Ink Remover
Ultrasonic Washer (Blackstone model SK 6315)
Fresh water rinse followed by air pressuring drying. A putty knife was used to remove foam from the impellers during the fresh water rinse. A nylon bristle brush was used to remove foam from the shaft during the fresh water rinse.
The ArmaKleen Technical Center recommended using 100% by volume ArmaKleen™ Paint and Ink Remover at 160°F in an Ultrasonic Washer for a minimum of 2 hours.