TSR #15-P-127

Before Picture
Before
After Picture
After

Cleaning Trial Summary

 

The customer was looking to improve their cleaning performance, automate their cleaning process, reduce rework and reject rate, eliminate hazardous chemicals and waste and reduce VOCs.

Cleaning Trial Type
Temperature
Ink
150°F – 160°F
Industry
Time Required
Manufacturing
1 to 2.5 hours
Segment
Substrate
Primary Metal Manufacturing
Soil
Ink
Description of Part(s)
Print disks
Cleaner Used
Machine Used

1.       Ultrasonic Washer (Blackstone SK 6315)

2.       Spray Under Immersion Washer (Graymills T12, Graymills T24, SK 81.8 w/SUI)

Post Cleaning

Fresh water rinse followed by air pressure drying.

Recommendation to Customer

The ArmaKleen Technical Center recommended using 100% by volume ArmaKleen™ Paint and Ink Remover at 160°F in an Ultrasonic Washer for a minimum of 1 hour or 100% by volume ArmaKleen™ Paint and Ink Remover at 150°F in a Spray Under Immersion Washer for a minimum of 2.5 hours.