Before
After

Cleaning Trial Summary

Dealership :: TSR #17-P-162

Download

 

The customer was looking to improve their cleaning performance and eliminate hazardous chemicals/waste.

Cleaning Trial Type
Temperature
Paint
150°F
Industry
Time Required
Diesel Engine Dealer
1 – 2 hours
Segment
Substrate
Dealership
Aluminum
Soil
Grease, Grime, Oil, Shop Dirt, Unknown Paint
Description of Part(s)
an assortment of aluminum engine blocks
Cleaner Used

100% by volume ARMAKLEEN™ Paint & Ink Remover

5% by volume ARMAKLEEN™ 4 in 1 NF Cleaner

Machine Used

Spray Under Immersion Washer (Graymills T12, Graymills T24, SK Model 81.8 w/SUI)

Post Cleaning

Several areas were brushed with a nylon bristle brush during the fresh water rinse and then were air pressure dried.

Recommendation to Customer

The ArmaKleen Technical Center recommends using a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 150°F in a Spray-Under Immersion Washer for a minimum of 2 hours or a 5% by volume solution of ArmaKleen™ 4 in 1 Cleaner at 150°F in a Spray-Under Immersion followed by a 100% by volume solution of ArmaKleen™ Paint and Ink Remover at 150°F in a Spray-Under Immersion for a minimum of 1-1.5 hours.